Bluetooth Qualification Tester Protocol Tester
Bluetooth Qualification Tester
BITE Protocol Conformance Tester
Testing and Qualifying Bluetooth® Products
Bluetooth Qualification is the official process that all the equipment and applications must fulfil in order to get the
Bluetooth logo. The qualification shows a certain measure of compliance and interoperability.
BITE (Bluetooth QualIfication TEster) is a powerful and automatic test system that will make easy all the steps of the
qualification testing, from filling the PICS/PIXIT tables to the test report generation.
AT4 wireless, your best partner in Bluetooth
AT4 wireless is a world-wide reference at the moment for Bluetooth Testing and Qualification, from our early experience
in 1998 in the definition of the qualification process to our leadership in qualification testing through our state-of-the-
art BQTF and experienced BQBs.
This deep knowledge in the technology is driving our leadership in Bluetooth conformance testers with our world-class
reference platform, BITE.
The BITE Protocol Tester performs automatically the conformance test cases for Bluetooth protocols and profiles,
according to the Bluetooth Qualification Test Cases Reference List (TCRL), both for V1.2 and V2.0+EDR implementations.
Testing BB, LM, GAP, L2CAP, SDP, SPP/RFCOMM and HCI Bluetooth protocols and profiles according to the
Bluetooth V1.2 and Bluetooth V2.0+EDR test specifications.
Officially validated by the Bluetooth SIG (V1.2/V2.0+EDR)
Friendly Graphic User Interface (GUI)
Manual/Automatic Test Cases Selection
Test Case Mapping, according to the official TCRL
Static Conformance Review
Test log Analysis
Decoding, Filtering and Debugging
EUT (Equipment Under Test) database
Automatic Test Report Generator
The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by AT4 wireless is under license. Other trademarks
and trade names are those of their respective owners.
Figure 1 shows the hardware architecture of the tester. The Bluetooth hardware is a PCI-based DSP/FPGA platform
with a RF front-end. The control and the test software run on the host PC.
Figure 1. BITE Protocol Tester Hardware Architecture
Graphical User Interface
Fully compatible with Microsoft Windows Applications (tables can be filled using Microsoft Excel and Reports are created
in Word format). The GUI is very easy to use, robust and powerful and it is common to all AT4 wireless Test Systems,
thus maximising the flexibility.
The test operator will be guided by the system throughout the testing process, and it will have access to all the traces,
charts and filtered logs for debugging and analysis.
Technical Support Services
AT4 wireless provides standard as well as customised support packages, including some or all of the following services:
Downloading of new software and documentation
versions through the BITE Technical Support Web Site.
AT4 wireless will inform Customers whenever new
releases and new documentation can be downloaded
from the AT4 wireless Web Site and will provide the
detailed instructions to install the new software
Problem Resort Service, via telephone or e-mail
Remote troubleshooting and diagnostics via the Internet.
The customer can give access to the system to AT4
wireless Technical Support staff, allowing fast diagnostics
and maximising the operation time of the system
Other AT4 wireless Test Systems
AT4 wireless develops other Test Systems:
The MINT systems cover the testing requirements of
GSM/GPRS/EDGE/UMTS mobile terminals.
The MINT system for WiMAX covers the testing requirements of
The RIDER system is a solution for testing the radio and protocol
requirements of RFID products.
Tel: +34 952 61 91 68
Fax: +34 952 61 94 15
e-mail: [email protected]
HQ UNE-EN ISO
Parque Tecnológico de Andalucía 9001:2000
C/ Severo Ochoa, 2 • E-29590 • Málaga Nº 0.04.04056
R&D Centre • Offices: Madrid • Sevilla www.at4wireless.com
This document is the property of AT4 wireless. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior permission of AT4 wireless.
Product specifications are subject to change without notice.Trade names are trademarks of the owners.
- Related pdf books
- Popular epubs
- BITE PROTOCOL TESTER
- Agilent J8120A VPT501 Vehicle Protocol Tester Series 500 Testing ...
- Bluetooth/802.11 Protocol Adaptation for RFID Tags
- Bluetooth Location Tracker Protocol
- QUALIFICATION AND VALIDATION DOCUMENT PROTOCOL - Title: Stopper ...
- eNodeB Protocol Conformance Tester
- Repairing the Bluetooth pairing protocol
- Bluetooth Security Protocol Analysis and Improvements
- A location-aware multicasting protocol for Bluetooth Location ...
- Transmission Control Protocol for Bluetooth Mohammed Rana Basheer
- Bluetooth Simulation Model in OPNET
- Bluetooth Sniffer v. 3.0 + HS